Bob Smith Industries Foam-Cure 4 Ounce Glue

Foam-Cure 4 Ounce Glue

• Compatible with all foams
• Dries crystal clear
• Overnight cure for full strength
• Foam Cure will act like a contact cement when the parts are re-joined
• It will bond wood and plastic to foam and is a good canopy glue
• Flash point: 61.0 degrees_fahrenheit

Foam-Cure is a silicone based adhesive for EPO and EPP foams. It cures clear and slightly flexible, but it does not bond instantly like CA glues. There is also no accelerator for this adhesive. You can speed adhesion by applying to one piece, fitting the two pieces together, and then pulling the pieces apart for about 10 minutes. When you fit the parts together again, the joint will be tacky and adhere well. Full cure time is 10 – 12 hours. In addition to foams, Foam-Cure will bond wood and plastic to foams, and is also a good canopy glue. While it is somewhat flexible, it is not flexible enough to act as a hinge for control surfaces, and it does not work well on large areas of non-porous contact surfaces. Foam-Cure cures when exposed to air, so some surface porosity is essential to allowing the solvent to evaporate. Foam-Cure can be thinned with denatured alcohol.